Termékek Menü
0

Extron Matrix 6400 Audio Switcher

Extron Matrix 6400 Audio Switcher Katt rá a felnagyításhoz
Ár:
49.900 Ft (39.291 Ft + ÁFA)
Gyártó: Extron
Cikkszám: Z4073011
Elérhetőség: Utolsó 1 db
Várható szállítás: 2017. december 20.
Szerezhető hűségpontok: 50
Hogyan kell rendelni ?

Leírás és Paraméterek

Bekapcsolásig tesztelt, használt termék! 

Csak a készülék van meg, doboza és papírjai nélkül.

 

http://www.expandore.com/product/add/Extron/Modular%20&%20Expandable/Matrix_6400_Audio.htm

http://www.ebay.com/itm/Extron-Matrix-6400-RGB-Horizontal-Sync-Switcher-Series-Chassis-430-Mhz-/171452557144?pt=LH_DefaultDomain_77&hash=item27eb5e6758

FPC 1000, MKP 1000, and MCP 1000

With the Matrix 6400 Audio Series control options, controlling any system is easy. RS-232 and RS-422 control and programming is easy and quick with Extron's SIS™ - Simple Instruction Set.

Features

  • Inputs: Captive screw connectors
  • Outputs: Captive screw connectors
  • Field upgradeable and modular design  — The Matrix 6400 Audio matrix switchers provide the highest level of cost-effectiveness, flexibility, and expandability by allowing users to purchase only the modules required for their systems. Additional modules may be added at any time without having to send the unit back to the factory for expansion or application change.
  • 100 rooming memory presets  — Provides presets for up to 10 rooms for a total of up to 100 rooming presets for added flexibility and control in routing signals.
  • Optional redundant power supply  — An additional power supply may be internally mounted to give the Matrix 6400 Audio matrix switchers a backup power supply. This feature may be necessary in critical applications where power reliability is a crucial factor.
  • Easy-to-use LCD FPC 1000 Front Panel Controller  — The FPC 1000 has a large LCD window that allows direct access and total control over all presets and switching functions. Menus in the FPC 1000 provide an intuitive interface for easy setup and programming.
  • 32 global presets  — The Matrix 6400 Audio matrix switchers can be configured for several different applications without the need for changing the settings each time the application changes.
  • Video genlock  — Audio switching can be synchronized with video switching for clean, accurate audio-follow-video transitions.
  • Input and output connectors are clearly labeled  — All connectors are clearly labeled for easy installation. With the Extron virtualization/control software, a visual map can be printed for easy representation of the virtual I/Os. This feature reduces the time required for setup and programming.
  • RS-232 and RS-422 control port  — Using serial commands, the Matrix 6400 Series can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.
  • Extron virtualization/control software  — Extron has developed a Windows®- based software that provides the ability to mix and match inputs to outputs. This program, shipped with every Matrix 6400 Audio matrix switcher, makes I/O configuration simple because it uses graphic icons and icon labeling capabilities. More importantly, the software also allows users to configure the switcher via an emulation mode even if the switcher is not available. Once the matrix is built with the software and the configuration is saved, the switcher is ready to operate.
  • Optional control panels and keypads  — Provide the flexibility to control a Matrix 6400 Series matrix switcher from a remote location.
  • RGB and audio mute
  • Balanced or unbalanced mono or stereo audio  — The Matrix 6400 Audio matrix switchers offer the flexibility for both balanced or unbalanced audio signals. Depending on the application and cable distance requirements, some systems will require balanced audio.
  • Audio input gain and attenuation  — The Matrix 6400 Audio matrix switchers allow users to set the level of audio from front panel controls or RS-232 and RS-422, whether for gain or attenuation, -15dB to +9dB.
  • Trouble status indication  — The Matrix 6400 Audio matrix switchers track status indicators at all times, and with the FPC 1000, the installer can monitor RS-232 and RS-422 communications from and to the unit. This saves valuable time in troubleshooting.
  • Front panel security lockout  — If a Matrix 6400 Audio matrix switcher is installed in an unsecured environment, an optional password feature can be implemented. When this feature is in use, a password is required to operate the front panel controller.
  • Rack-mountable metal enclosure  — The Matrix 6400 Audio matrix switchers are rack-mountable in any conventional 19-inch rack using included hardware.
  • Highly reliable, energy-efficient internal universal power supply  — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with  high demonstrated reliability .
Matrix 3200/6400 Series
Video — wideband video BME
Routing 16 x 8 or larger matrix up to 32 x 32 or 64 x 64, depending on model and configuration
Gain Unity
Bandwidth
Matrix Wideband 430 MHz (-3 dB), fully loaded
0 - 10 MHz No more than +0.1 dB to -0.1 dB
0 - 130 MHz No more than +4 dB to -0.25 dB
Phase between I/Os <1.28° at 3.58 MHz
Differential phase error 0.1%, 3.58 MHz and 4.43 MHz
Differential gain error 0.1°, 3.58 MHz and 4.43 MHz
Max. propagation of delay 5 ns typical (±1 ns)
Crosstalk -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed 200 ns (max.)
Video — low resolution video BME
Routing 16 x 8 or larger matrix up to 32 x 32 or 64 x 64, depending on model and configuration
Gain Unity
Bandwidth
Matrix Low Res 150 MHz (-3 dB), fully loaded
0 MHz to 10 MHz no more than +0.1 dB to -0.1 dB
0 MHz to 30 MHz no more than +0.5 dB to -0.5 dB
Crosstalk 80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz
Switching speed 200 ns (max.)
Video input — wideband video BME
Number/signal type Up to 32 or 64 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
Connectors Female BNC (quantity varies with configuration)
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels Analog 0.5 V to 1.5 Vp-p with no offset
Impedance 75 ohms
Return loss -30 dB @ 5 MHz
Video input — low resolution video BME
Number/signal type Up to 32 or 64 (varies with configuration) RGsB, RsGsBs, component video,
S-video, composite video, HDTV
Connectors Female BNC (quantity varies with model)
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum level Analog 0.5 V to 1.5 Vp-p with no offset
Impedance 75 ohms
Return loss -30 dB @ 5 MHz
External sync (genlock) 0.3 V to 12 Vp-p, 75 ohms
Video output — wideband video BME
Number/signal type Up to 32 or 64 (varies with configuration) RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, composite video
Connectors Female BNC (quantity varies with configuration)
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Maximum level 2 Vp-p
Impedance 75 ohms
Return loss -25 dB to input section up to 50 MHz
DC offset ±10 mV typical with input at 0 offset
Switching type Triple-Action™
Slew rate >200 V/ms
Video output — low resolution video BME
Number/signal type Up to 32 or 64 (varies with configuration) RGsB, RsGsBs, component video,
S-video, composite video, HDTV
Connectors Female BNC (quantity varies with configuration)
Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels 0.5 V to 1.5 Vp-p
Impedance 75 ohms
Return loss -40 dB to input section at 3.58 MHz/4.43 MHz
DC offset ±10 mV maximum with input at 0 offset
Switching type Vertical interval
Slew rate >200 V/ms
Sync — sync BME
Input and output types Software configurable for RGBHV or RGBS
Sync connectors Up to 64 or 32 BNC female (quantity varies with configuration)
Input level 0.5 V to 5 Vp-p (4 Vp-p nominal)
Output level 5 Vp-p
Gain AGC to TTL 4.0 V to 5.0 Vp-p
Input impedance Inputs 1 - 16 510 ohms or 75 ohms, switchable
Inputs 17 - 64 510 ohms
Output impedance 75 ohms
Horizontal frequency 15 kHz to 150 kHz
Vertical frequency 30 Hz to 150 Hz
Polarity Positive or negative (follows input)
Audio — audio BME
Routing Up to 64 x 64 mono or stereo matrix (in increments of 8), balanced/unbalanced
Gain (selectable per output) Unbalanced output 0 dB (as shipped), or -6 dB (jumper-selectable)
Balanced output +6 dB (as shipped), or 0 dB (jumper-selectable)
Frequency response 20 Hz to 20 kHz, ±0.05 dB
THD + Noise 0.03% @ 20 Hz to 20 kHz, +15 dBu input, +21 dBu output nominal level
S/N >85 dB, balanced, at rated maximum output
Crosstalk <-70 dB @ 20 Hz to 20 kHz, fully loaded
Stereo channel separation >70 dB @ 20 Hz to 20 kHz
CMRR >+75 dB, 20 Hz to 20 kHz
Audio input — audio BME
Number/signal type (8 to 64) (in increments of 8) mono or stereo, balanced/unbalanced
Connectors (8 to 64) 3.5 mm captive screw connector, 5 pole (stereo) or 3 pole (mono)
Impedance >10k ohms unbalanced/balanced, DC coupled
Nominal level -10 dBV (316 mV)
Maximum level +21.5 dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment -15 dB to +9 dB, adjustable per input via RS-232 control or front panel
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio BME
Number/signal type Up to 64 (in increments of 8) mono or stereo, balanced/unbalanced
Connectors 3.5 mm captive screw connectors, 5 pole (stereo) or 3 pole (mono) (quantity varies with configuration)
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1 dB channel to channel
Maximum level (Hi-Z) >+26.0 dBu, balanced at 1%THD+N
Maximum level (600 ohm) >+24.0 dBm, balanced at 1%THD+N
Control/remote — switcher
Serial control port RS-232 or RS-422, Female 9-pin D connector
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
System intercommunications 2 RJ-11 connectors
Remote key pad control (2) 5 mm, 5-pole captive screw connectors
Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
General
Power* 100 VAC to 240 VAC, 50-60 Hz; internal
Matrix 6400 wideband............ 110 watts at 115 VAC, 60 Hz
Matrix 3200 wideband............ 50 watts at 115 VAC, 60 Hz
Matrix 6400 video.................... 90 watts at 115 VAC, 60 Hz
Matrix 3200 video.................... 40 watts at 115 VAC, 60 Hz
Matrix 6400 sync...................... 65 watts at 115 VAC, 60 Hz
Matrix 3200 sync...................... 35 watts at 115 VAC, 60 Hz
Matrix 6400 audio.................... 195 watts at 115 VAC, 60 Hz
*A redundant power supply is available.
Temperature/humidity Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Fan, left to right as viewed from front panel
Mounting
Rack mount Yes
Enclosure type Metal
5U dimensions 8.75" H x 17.0" W x 14.1" D (5U high, full rack wide)
22.2 cm H x 43.2 cm W x 35.8 cm D
(Depth excludes connectors. Width excludes rack ears.)
7U dimensions 12.25" H x 17.0" W x 14.1" D (7U high, full rack wide)
31.1 cm H x 43.2 cm W x 35.8 cm D
(Depth excludes connectors. Width excludes rack ears.)
Shipping/product weight, rack height Matrix 6400 wideband... 42 lbs (20 kg)/29.1 lbs (13.2 kg), 7U
Matrix 3200 wideband... 30 lbs (14 kg)/22.2 lbs (10.1 kg), 5U
Matrix 6400 video.......... 33 lbs (15 kg)/25.3 lbs (11.5 kg), 5U
Matrix 3200 video.......... 30 lbs (14 kg)/22.4 lbs (10.2 kg), 5U
Matrix 6400 sync........... 44 lbs (20 kg)/31.4 lbs (14.2 kg), 7U
Matrix 3200 sync........... 29 lbs (14 kg)/21.0 lbs (9.5 kg), 5U
Matrix 6400 audio......... 38 lbs (18 kg)/28.4 lbs (12.9 kg), 5U
DIM weight, international 44 lbs (20 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, UL
EMI/EMC CE, FCC Class A
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.

Vélemények

Erről a termékről még nem érkezett vélemény.

Írja meg véleményét



Megjegyzés: A HTML-kód használata nem engedélyezett!
Értékelés: Rossz Kitűnő

Termék címkék: Extron, switcher