Termékek Menü
0
70/ 368- 2562

Extron Crosspoint Plus Series Switcher with DSVP 16 x 16 Crosspoint 1616

Extron Crosspoint Plus Series Switcher with DSVP 16 x 16 Crosspoint 1616 Katt rá a felnagyításhoz
Ár:
44.900 Ft (35.354 Ft + ÁFA)
Gyártó: Extron
Cikkszám: Z4073101
Elérhetőség: Utolsó 1 db
Várható szállítás: 2017. augusztus 22.
Szerezhető hűségpontok: 45
Hogyan kell rendelni ?
Menny.:
Maximálisan rendelhető mennyiség: 1!

Leírás és Paraméterek

Bekapcsolásig tesztelt, használt termék! 

Csak a készülék van meg, doboza és papírjai nélkül.

 

  • RGBHV  — The CrossPoint 1616HV models switch separate horizontal and vertical sync to ensure proper sync polarity, providing a more stable image. All models switch RGBS, RGsB, HDTV, component video, S-video, and composite video.
  • 200 MHz (3dB) RGB video bandwidth, fully loaded  — Ensures switching and distribution of most signals without degradation. The 200 MHz (-3dB) rating is a worst case specification, i.e., the CrossPoint 1616 matrix switchers provide 200 MHz (-3dB) at full performance capacity when one input signal drives all outputs.
  • QuickSwitch Front Panel Controller (QSFPC™)  —
  • Front panel I/O label windows  — I/O buttons may be labeled by any Brother P-Touch labeler or Extron label software, which ships with every Extron matrix switcher. Each input and output can be labeled with names, alphanumeric characters, or even color bitmaps for easy and intuitive input and output selection.
  • View I/O mode  — Allows user to easily see which individual inputs and outputs are actively connected. Available from the front panel or RS-232 and RS-422 control.
  • Global presets  — Individual I/O configurations may be saved and recalled either from the QuickSwitch Front Panel Controller or RS-232 and RS-422. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
  • RS232 and RS422 control  — The CrossPoint 1616 matrix switchers offer RS-232 and RS-422 control, allowing the switcher to be controlled via a third party control system. Extron's SIS™ (used for RS-232 and RS-422 control) is easy to learn, and use, and allows users to generate characters directly from a keyboard.
  • Simple Instruction Set (SIS™)  — Extron's SIS is a set of basic ASCII code commands that provide simple control through a third party control system. Instead of programming in long, obscure strings of code, SIS makes it easy to operate an Extron product using RS-232 and RS-422 control.
  • Control software  — For RS-232 and RS-422 remote control from a PC, Extron ships our Windows®-based with every matrix switcher. This icon-driven software uses a graphical, drag-and-drop interface to make I/O configuration and other customization functions simple and convenient. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may then be saved for future downloading to the matrix switcher.
  • MCP 1000 and MKP 1000 control  — Utilizing the MCP 1000 Master Control Panel and any combination of MCP 1000 slave control panels or MKP 1000 control keypads offers the flexibility to control a CrossPoint 1616 matrix switcher from a remote location. Both remote control options are easy to use and provide tactile buttons for quick selection. Each MCP 1000 panel may be used for one-button switching for a particular output and selecting global presets. Each MKP 1000 keypad may be used
  • Input audio gain and attenuation (adjustable via RS232 and RS422 or front panel)  — The Extron CrossPoint matrix switchers allows users to set the level of audio gain or attenuation (-15dB to +9dB). Individual input audio levels may be adjusted so there are no noticeable volume differences between sources.
  • Audio breakaway  — The CrossPoint 1616HVA provides the capability to break away an audio signal from its corresponding video signal. switching can be done via front panel control or RS-232 and RS-422 control.
  • Rackmountable  — The Extron CrossPoint 1616 matrix switchers are mountable in any conventional 19-inch wide rack.
  • Internal international power supply  — The autoswitchable, internal power supply provides worldwide power compatibility.
Video
Routing
1616 Series 16 x 16 matrix
Gain Unity
Bandwidth 200 MHz (-3dB), fully loaded
0 - 10 MHz no more than +0.1dB to -0.1dB
0 - 130 MHz no more than +6dB to -0.8dB
Crosstalk -50dB @ 5 MHz, -45dB @ 10 MHz
Switching speed 200 ns(max.)
Video input
Number/signal type 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors 84/88 Series 8 x 5 BNC female
124/128 Series 12 x 5 BNC female
168/1616 Series 16 x 5 BNC female
Nominal level 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum levels Analog 0.5V to 2.0V p-p
Impedance 75 ohms
Return loss -30dB @ 5 MHz
Maximum DC offset 1.5V
Video output
Number/signal type 4, 8, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors 84/124 Series 4 x 5 BNC female
88/128 Series 8 x 5 BNC female
168 Series 8 x 5 BNC female
1616 Series 16 x 5 BNC female
Nominal level 1V p-p for Y of component video and S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component video, and for C of S-video
Minimum/maximum level 2V p-p
Impedance 75 ohms
Return loss -30dB @ 5 MHz
DC offset ±5mV maximum with input at 0 offset
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB, RsGsBs
Input level 0.5V to 5.0V p-p, 4.0V p-p normal
Output level AGC to TTL 4V to 5V p-p, unterminated
Input impedance
84/88/124/128 Series All inputs 510 ohms
168/1616 Series Inputs 1, 3, 5, 7 75 or 510 ohms, switchable
Inputs 2, 4, 6, 8, and 9 through 16 510 ohms
Output impedance 75 ohms
Polarity Positive or negative (follows input)
Audio — audio models only
Routing 84 Series 8 x 4 stereo matrix
88 Series 8 x 8 stereo matrix
124 Series 12 x 4 stereo matrix
128 Series 12 x 8 stereo matrix
168 Series 16 x 8 stereo matrix
1616 Series 16 x 16 stereo matrix
Gain Unbalanced output 0dB; balanced output:+6dB
Frequency response 20 Hz to 20 kHz, ±0.05dB
THD + Noise 0.03% @ 1 kHz at rated nominal level
S/N >90dB, balanced, at rated maximum output (21dBu)
Crosstalk <-80dB @ 1 kHz, fully loaded
Stereo channel separation >80dB @ 1 kHz
CMRR >75dB @ 20 Hz to 20 kHz
Audio input — audio models only
Number/signal type 8, 12, or 16 stereo, balanced/unbalanced
Connectors (8, 12, or 16) 3.5 mm captive screw connectors, 5 pole
Impedance >10 kohms unbalanced/balanced, DC coupled
Nominal level -10dBV (316mV)
Maximum level +19.5dBu, (balanced or unbalanced) at 1%THD+N
Input gain adjustment -15dB to +9dB, adjustable per input by RS-232 or
front panel
Audio output — audio models only
Number/signal type 4, 8, or 16 stereo, balanced/unbalanced
Connectors (4, 8, or 16) 3.5 mm captive screw connectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) >+15dBm, balanced or unbalanced at
stated %THD+N
Control/remote — switcher
Serial control port 1 RS-232 or RS-422, 9-pin female D connector
Baud rate and protocol 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Program control Extron's control program for Windows®
Extron's Simple Instruction Set™ _ SIS™
General
Power 100VAC to 240VAC, 50/60 Hz, internal, auto-switchable
84/88/124/128 Series 30 watts
168/1616 Series 36 watts
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +104°F (0° to +40°C) / 10% to 90%, non-condensing
Rack mount Yes, with included parts
Enclosure type Metal
Enclosure dimensions
84/88/124/128 Series 5.25" H x 17.0" W x 9.4" D (3U high, full rack width)
(13.3 cm H x 43.2 cm W x 23.9 cm D)
(Depth excludes connectors. Width excludes rack ears.)
168/1616 Series 10.5" H x 17.0" W x 9.7" D (6U high, full rack width)
(26.7 cm H x 43.2 cm W x 24.6 cm D)
(Depth excludes connectors. Width excludes rack ears.)
Product weight
CrossPoint 84/88/124/128 14.8 lbs (6.7 kg)
CrossPoint 168/1616 Series 19.4 lbs (8.8 kg)
Shipping weight
CrossPoint 84/88/124/128 21 lbs (9.5 kg)
DIM weight 25
CrossPoint 168/1616 26 lbs (11.8 kg)
DIM weight 34
Vibration ISTA/NSTA 1A in carton (International Safe
Transit Association)
Listings UL, CUL
Compliances CE, FCC Class A
MTBF 30,000 hours

Vélemények

Erről a termékről még nem érkezett vélemény.

Írja meg véleményét



Megjegyzés: A HTML-kód használata nem engedélyezett!
Értékelés: Rossz Kitűnő

Termék címkék: Extron, switcher